Do you want to learn how to make a chair, a bed for dolls, a peignoir, underwear, a coat, an evening dress for Barbie? Check out the master classes.

How to make a bed for dolls?

This does not require special materials and equipment, an ordinary cardboard box is suitable, it needs to be cut in a certain way and the parts connected.

We begin to create a crib for a doll from a pattern. You will need to redraw it on cardboard. You can rely on those sizes that are given or use your own, according to the size of the doll.

Dimensions shown are in inches. They are easy to translate into Russian size, if you know that there are 2.54 cm in one inch.

The bottom diagram is the base of the bed for dolls. This is a rectangle 50 cm long, 33 cm wide (we round the numbers). Stepping back from the large sides of 2.5 cm, make cuts. They will be needed for a strong connection of parts. As you can see, on the left, the length of the two slots is 3 inches, that is, 7.6 cm each. On the right, they are 14 cm.

You will attach the legs and headboards to these slots. The back, labeled foot, will be near the doll's legs. Here you will attach the legs of the bed, indicated by the same word. Headboard - headboard. The legs that you will attach here are marked with the same word. Here's how many and what details you should have as a result cut out on cardboard:

• base - 1 pc.;
• headboard - 1;
• side near the legs - 1;
• front legs - 2 pcs.;
• hind legs - 2 pcs.

When connecting the parts, pay attention to the colored circles on the pattern. Green indicates the connection of the legs, in the direction of which the doll will lie with its feet. Yellow shows the alignment of the parts in the headboard.

This is how a doll bed is made. It may not only be of this texture.

Other furniture for Barbie

In this case, the night bed for dolls will turn out like this:

At first glance, it is hard to believe that the base of the bed is not made of wood or plastic, but of paper.

Here's what you'll need for this craft:

• light cardboard;
• White paper;
• the cloth;
• glue;
• synthetic winterizer;
• scissors;
• cord;
• ear sticks;
• foam sheet;
• toothpicks;
• needle with thread.

We begin the production of an important piece of toy furniture with the manufacture of a base, in this case a mattress. Cut out a piece of thick cardboard for the base. In order not to make a mistake in size, first put Barbie on it, cut a little with a margin to bend the edges on all four sides and thereby give volume to the base. Attach it from the inside to the fabric, cut it with allowances on all sides, grease the edges with glue, fold them onto cardboard and press. Inside the resulting box, put a sheet of foam for strength.

Now, from another cardboard, cut out a rectangle that matches the size of the mattress. Put a sheet of synthetic winterizer on it, and on top - a slightly larger cloth, so that you can then bend the edges of the flap. Sew all three layers together, imitating spring mattress stitches.

Attach this upper part of the base to the bottom, glue the fabric on the sides so that the mattress for the doll is complete.

Let's start decorating it. To do this, cut a strip from the fabric, coat it with glue from the inside, attach a cord here, wrap the canvas in a “roll”.

Glue this element to the side of the mattress, attach another one created in the same way below.

This is such a beautiful mattress.

We make the headboard and footboard of the bed out of cardboard. Focusing on the diagram below, redraw the details.

Then cut them out.

To make the parts of the night bed strong, create three identical parts and glue them together. In the same way, assemble the legs of the bed using 4 identical elements. Glue them and the cross members of the headboard in place. Here's what you should get.

The frame and footboard of such furniture for Barbie or another doll is made from the same cardboard. 3 identical parts are cut out of it, glued together. When the foot is still wet, fold it on one side and the other as shown in the photo. Let dry in such a position that the part takes this shape.

Now it will not be difficult to assemble the bed. Glue vertical and horizontal elements to the foot part.

Let's turn the ear sticks into the legs of the bed. Remove cotton wool from them, cut to the desired length.

To make this piece of toy furniture very beautiful, let's make the legs curly. To do this, cut strips of paper, on one side make the corners sharp.

Roll each strip onto a stick, from wide to sharp edge.

Narrower stripes can continue to decorate the legs of the bed.

Cut off the sharp edge from the toothpicks on one side, insert the other into the hollow holes of the sticks.

Glue the legs in place.

If you wish, you can use a stencil to cut out decorative elements from cardboard and use them to decorate a bed for dolls.

Just like you decorated the legs, decorate the small elements for the bed. Glue them as shown in the photo.

Cover your creation with paint, varnish. After the mortar dries, you will have a wonderful bed for dolls.

Now you will be able to make other furniture for Barbie and other dolls.

How to make a chair with your own hands?

It will look like the real one. For this piece of furniture you will need:

• cardboard;
• wooden skewer;
• transparent glue;
• acrylic paints;
• PVA glue;
• sandpaper.

Looking at the photo clue, cut out three pieces of cardboard for the back of the chair, one for the seat. Make the legs from a wooden skewer, note that the back ones are longer than the front ones. In the finished product, they will be on the same level.

To make the back curved and strong, use this trick. Mix PVA and water in equal proportions, dip this part into this mixture. Then attach it to a round vial, wrap it with a bandage, remove the structure to dry on the battery.

While this is happening, glue the front legs.

Now cut a thin strip of cardboard, its length should be such that it reaches from one front leg to the other, if you pass it along the contours of the semicircular seat. To give the strip a curved shape, soak it in the same mixture of glue and water, wring it out. Glue this part in a semicircle, and a strip of the same width between the front legs in a straight line.

Here's how to make the chair go further. Glue the back legs in place.

The back has already dried on the battery, so you can glue it in place.

From the same cardboard, cut 2 strips from the back to the seat. Glue them as shown in the photo.

Now you need to give the chair additional strength. To do this, generously grease it with PVA, let the glue dry.

After that, you can paint the chair in any color. Dark was used here, and to give the object the effect of antiquity, the paint was slightly worn with sandpaper, and covered with matte varnish on top.

How are clothes for dolls sewn?

Daughters will be pleased not only with new furniture for Barbie, but also with things. Make them with your children to instill in them a love for this type of needlework from an early age. Start with simple things, such as creating such a peignoir. Enlarge the pattern on the monitor screen so that the thing is the size of the doll.

As you can see, the pattern consists of only two elements. Fold the fabric in half lengthwise, attach a large piece, cut out. Place the pattern on the wrong side of the fabric, mark with small places the two slots into which Barbie's hands will stick through. For the collar, cut out the details by folding the fabric in half.

Here's how to create such clothes for dolls with your own hands. Sew the peignoir at the back, connecting the two floors of the back. Cut a hole for the hands, process it with braid or oblique trim. Sew the right and left shelves. These places of smell can also be decorated with ribbon.

Connect both parts of the collar to each other on the wrong side, while leaving free space near the neck. Turn the collar right side out. Sew with the neck first its lower side, and then the upper.

If you want to decorate the collar with braid, then first put this decorative tape between its two parts, trim the edges of all three parts so that they are on the same level, sew on the wrong side. When you turn the collar inside out, you will see that it is decorated with braid.

It remains to trim the bottom of the peignoir, sew on a tie, after which the new outfit for Barbie is ready. Underwear will also not be difficult to create. The pattern consists of only one piece.

To sew a combidress, redraw the pattern on paper. As you can see, it is one piece.

Attach the paper backing to the wrong side of the fabric, cut out, adding 1 cm on all sides for seam allowances. Transfer the symbols to the wrong side.

If you have a dark fabric, it is convenient to redraw the pattern details on it with a crayon, but on a light one, a simple pencil is usually used.

Draw stripes here on the shelf and back, marking the waist line with them. Now fold the fabric blank in half, connecting the front sides. In this case, the numbers: 1, 2, 5, 6 must be connected in pairs. Sew off the sides. Where segments are drawn on the diagram, insert an elastic band. To do this, measure it along the doll's waist line, stitch it from the inside with a zigzag seam, stretching it.

Treat the bottom and top of the jumpsuit with braid, make two straps out of it, sew them in place.

Evening dress for Barbie consists of only two parts. Please note that the front is one-piece, and the back must be created from two elements, since there will be a cut in the back on it and below the knees.

Redraw the details on the pattern, and then on the fabric folded in half. Cut out with seam allowances. Sew right and left side back, as well as a slit at the bottom. Sew these details on the hips. Now attach the back and shelf right sides to each other, sew these parts on the sides. Finish the neckline at the front.

Cut a long and narrow strip from the fabric. Sew her sides, tie a bow, sew on the back of the dress.

Here's how wonderful it will turn out.

So that the daughter's ward does not freeze on cold days, see how to sew a coat.

For him, take a thick fabric. Pin the redrawn parts as follows. The back will be holistic, so put its pattern on the fabric folded in half. Redraw, unfold the canvas, mark the places of the upper folds, lay them, fasten with a thread with a needle.

The shelf details are the right and left halves of the front. Wrap the straps along the dotted lines, then sew on one button, and make cuts for them in the other. Cut out 4 sleeve pieces. The base of the beret consists of a circle, dotted lines indicate the place of the fold.

We start sewing coats. Stitch the side seams of the shelves and back on the wrong side, connect the details of the sleeves in pairs, sew. Close the shoulder seams too. Insert the right and left sleeves into the corresponding armholes, stitch inside out. Shoulder pads can be sewn on to make the coat fit well. Hem it down. Fold the collar in half as shown in the diagram, stitch it to the neck.

It remains to cut and overcast loops, sew buttons on the other side and praise yourself for being able to sew a coat with your own hands.

To sew a beret, sew an oblique trim along its entire rounded edge, thread an elastic band into the resulting drawstring, measured according to the volume of the doll's head.

These are the sets for Barbie you can sew with your own hands or with a junior assistant.

If you like wicker furniture, check out how to make one for Barbie:

But how to make a sofa box for dolls:

How to quickly sew a dress from a sock for Monster High, Barbie, you will learn from this story.

Children, playing completely copy the habits, preferences of adults, especially girls. Each of them has their own favorite play set, including dolls and doll furniture. In order for the game to be complete, in their opinion, the dolls need their own home, where there will be tables, chairs, a kitchen, armchairs, beds and much more. You can buy these items ready-made, but exclusive handmade doll furniture will be much more dear and beautiful. Especially if you do it with your daughter. Having made her work, the baby will love this furniture and will never part with it.

Materials and tools

It is an erroneous statement that it is long, difficult and troublesome to make furniture for a Barbie doll with your own hands. Having tried hota once, it will be very difficult to refuse this activity. Especially when you see how happy the daughter is with the new product. Buying something specific is not necessary. In every house there is something unnecessary, but suitable for doll furniture.

For example:
plywood and its trimmings;
matchboxes;
boxes and jars of cosmetics;
shoe packaging boxes;
sponges;
fabric scraps;
plastic bottles;
threads, beads;
ice cream sticks;
toothpicks and clothespins;
foil, ropes, wire.

It is these materials that can serve as the basis for home-made furniture for dolls. In addition to them, in order to make it, you also need to prepare:
stationery scissors;
compass;
felt-tip pens and markers;
rulers;
glue;
watercolor paints;
stapler.

Perhaps everything will not be required at once, or other tools may be needed - it depends on the degree of complexity of crafting furniture for dolls and the imagination of the masters - mothers and daughters.

Step-by-step instruction

Ideas and options on how to make furniture for dolls with your own hands from improvised materials, we will consider a little later, now we will analyze the manufacturing steps:
1. Before starting work, you need to come up with a layout or find a suitable one on the Internet.
2. Transferred to paper or printed.
3. Circle the pattern with a marker and cut out the finished figure with scissors.
4. Further, it’s easier than ever, you need to fasten all the details together.
5. To make the furniture more beautiful and brighter, it can be trimmed with scraps of fabric or simply painted with paints.

Good houses are made from cardboard. It is considered the most affordable and convenient material.

You can, if you know how to make furniture for dolls from matchboxes with your own hands. They make roomy and very comfortable chests of drawers, table drawers and other doll interior items.

Wire. The material contains a video on how to make furniture for dolls from improvised materials, including wire. There are many options and you can choose the most affordable and easy from them.

Now consider the successful options for creating furniture for dolls with your own hands using examples.

Bed

Consider the simplest option for making a doll bed with drawers for things. For work you need to stock up:
empty matchboxes;
a sheet of cardboard;
stationery glue or PVA;
pencil for drawing a diagram;
scissors for cutting out elements;
clean white paper;
beads;
paints;
thin rope or wire;
other materials for decor - and the discretion of everyone.

Instructions on how to make do-it-yourself doll furniture from matchboxes, in our case, a bed with drawers:
1. First, measure the height of the bed. To do this, you can measure the doll with a ruler and, from the measurements taken, calculate the number of empty matchboxes.
2. Then glue all the boxes with the sides - thus creating the base of the bed.
3. Paste the finished structure with white or colored paper, without affecting the boxes.
4. The back is cut out of cardboard. The form depends on the desire of the craftswoman or the preference of the daughter.
5. The sides of the bed are glued to the base.
6. The bed is painted in the desired color.
7. Beads - handles are attached to drawers with wire.

How to make newspaper tubes:
1. The newspaper is cut into pieces of the same width and length.
2. Each layer is smeared with glue.
3. You can use as a basis: a knitting needle, a sewing needle and a ballpoint for a pen. A newspaper strip is wound on it.
4. The base is stretched, the tube is given time to dry.

Sofa assembly process:
1. A base is woven from dry tubes - 15 pieces in the transverse direction and 5 in the longitudinal direction.
2. We form a side in 5 rows.
3. We build up the racks, we make about 6 legs.
4. We cut the blanks.
5. Add skewers to the middle racks for strength.
6. We break, at a distance of 5 cm, first the first blanks, then the second - also at a distance of 5 cm, fix the racks - glue a clothespin to them.
7. Cut off the excess length of the legs.
8. We insert racks in the back area.
9. Weave a few more rows - full, then 2 - incomplete (shortened).
10. We form the height with strips of cardboard.
11. Weave 3 more rows and close them.
12. We fix the crossbar with the diameters.
13. We wrap each leg.
14. We decorate the product at our discretion.

Kitchen

Making a kitchen set for a doll is also not at all difficult. The work will require different materials, depending on the imagination of the master, including a lot of boxes, if there are not enough of them, we finish it ourselves. So, we make furniture for dolls with our own hands, in particular the kitchen.

First, we make a single design from boxes selected by size. We put it in one large box - shoe packaging is quite suitable for this purpose. If you plan to create hanging cabinets, then glue them to the wall of cardboard by cutting the doors into them. We make doll furniture from newspaper tubes according to the master class, which is attached below.

Advice! If it turns out that the cardboard chosen for work is not dense enough, it can be made stronger by gluing several layers together.
Decorate with self-adhesive film or plain colored paper. Glue the lockers individually as well, build handles from beads attached with wire. From it you can also build a tap, and water pipe handles - from multi-colored beads. A bowl from a doll set can serve as a sink. Draw the distance between the cabinets and the sink with an apron, download the image you like from Runet, print it, and then stick it in the right place.

Do-it-yourself kitchen furniture for dolls is as easy to make as everything else:
wall cabinets can be made from plastic boxes from cosmetics or medicines;
you can also make a microwave from them;
a clock in a doll kitchen can be made from an ordinary button by attaching a drawn dial to it;
you can make a refrigerator out of a cardboard packaging for medicines by cutting one side part on three sides - it will serve as a door, stick cardboard shelves inside.
You can make a gas stove from a ready-made cardboard package, make burners from a computer disk by cutting out the desired diameter, and, for example, a bottle cap can serve as handles.
As you can see, there are a lot of ideas for creating miniature furniture, you can come up with even more on your own - the main thing is to turn on your imagination and act.

Table

Do-it-yourself furniture for dolls cannot be without such a necessary item as a table. It is even easier to make it than a kitchen or a bed. There are many options for drawings, photos, diagrams for creating them. You can use ready-made ones, or you can just think and decide how to make a furniture table for dolls out of the box with your own hands from what is at hand.

For example, this miniature table. To create it, you need to prepare:
plastic bottle;
piece of cloth;
cardboard sheet;
scissors and glue.

Instruction with step by step execution:
1. Cut out the table supports from the bottle in the amount of 4 pieces. For greater stability, when cutting, bend the legs.
2. Next, cut out a circle from cardboard, it will serve as a table top. Glue it to the bottom of the bottle.
3. From a piece of cloth prepared in advance, a tablecloth is cut in the form of a circle, with a diameter slightly larger than the countertop.
4. The table is covered with a tablecloth. For ease of use, glue the ends to the supports.
It is also easy and quick to build a plywood dining table. Do-it-yourself furniture scheme for dolls made of cardboard, plywood is attached.

Microwave

Do-it-yourself household furniture for dolls can be made not only from cardboard, but from paper. Here is this microwave, made from a regular stationery pencil sharpener, with a removable lid. Pasted over with white paper, you can use ordinary foil, then it will turn out to be metallic. From plasticine we make handles, levers and toggle switches. Such a miniature microwave oven will greatly decorate the kitchen furniture for Barbie dolls, as it looks realistic and functional.

Fridge

This household appliance must be a must for a good housewife, albeit a very small one. It is very easy to build cardboard furniture because this material is easy to work with, easily takes the desired shape, and sticks well.

For work you will need:
tea cardboard box;
white acrylic, you can use gouache;
cotton buds;
thick cardboard.

Progress:
1. With a clerical knife, you need to cut off the top of the tea box in such a way that we have self-opening doors.
2. Cut out shelves of the required width from cardboard.
3. We increase the length by a few millimeters, bend it down, insert it into the refrigerator, attach it to the side with adhesive tape or glue.
4. We fix the door with the same adhesive tape.
5. Paste the refrigerator with white paper.
6. We form handles from cotton swabs and glue them to the door. We paint with acrylic paint.
7. Cut out small pictures (you can use stickers) imitating magnets.
Such a cute refrigerator will become a real decoration of the doll's kitchen.

Chairs

Anyone who has:
fantasy;
perseverance;
a wish;
patience;
time.

If there are no ideas, a choice is attached to help: a drawing, do-it-yourself doll furniture made of cardboard, a photo and a diagram for tables, beds, chairs and other items of furniture for dolls.

From three boxes you can make this wonderful chair-stool. For very tiny dolls, matchboxes glued together are suitable.
To give additional strength, they are additionally connected with either masking or ordinary tape. A cardboard circle glued on top, covered with a synthetic winterizer fabric, will add softness and style to the product.

You can make furniture for dolls from plasticine, including chairs - it's very quick and easy, finishing them according to your preference. You can peep ready-made ideas from the Internet, you can come up with an idea yourself. This version of the chairs is made from a conventional tube from a thermometer.

It is done very simply:
1. First, the size of the finished product is measured - the doll is placed next to the tube and the height of the chair and back is measured.
2. For convenience, a chair layout is drawn on a tube, then cut out with scissors.
3. The recess is filled with crumpled pieces of paper or foam rubber.
4. Then the product is pasted over with a colored film or paper, wrapped in a fabric patch.
All! The chair is ready - quickly and easily.

Salon

At home, you can create any doll headset from what is at hand. After all, making furniture for dolls, and even more so with a child, is the highest reward for a parent. It becomes the most beloved and the most beautiful, because it is made with love. There are a lot of recommendations and tips on how to make furniture for Barbie dolls, do-it-yourself clothes and other miniature accessories, including a real beauty salon.

The barbershop must have tables, a sofa for relaxation, a sink, a TV, armchairs and a dressing table. It is not difficult to make this furniture for dolls from boxes with your own hands. For the dressing table you will need:
cardboard box;
sheet cardboard;
a piece of foil;
a small piece of ceiling plinth;
glue, marker;
self-adhesive or colored paper.

Step-by-step instructions on how to make cardboard doll furniture - in the form of a dressing table:
1. The height of the future structure is marked on the cardboard box.
2. The excess is cut off.
3. The bottom of the box should serve as the basis of the table, and it is used.
4. Supports (legs) are cut out from the bottom.
5. Glue the parts with glue.
6. Paste over the top with decor - colored paper or film.
7. The shape of the future mirror is drawn on cardboard.
8. A foil is glued onto the protruding part of the cardboard, the size corresponding to the mirror.
9. The edge (finishing frame) is made from thinly sliced ​​​​pieces of plinth. The table and the mirror are connected.

The chair for the table is made in a similar way. Only its height changes, and instead of a mirror, a back is made.
If the dressing table is supplemented with a chest of drawers or a bedside table for storing things, then the appearance of the hairdresser will change significantly. Arrange hairdressing accessories beautifully on the tabletop of the dressing table.

A locker for clothes in a hairdressing salon is a necessary thing. You can use patterns, do-it-yourself cardboard doll furniture schemes, which are full on the Internet, or you can make it from a simple cardboard box of any size. Putting it on the side, which is smaller, we automatically get opening doors. The surface is decorated with film or paper, the internal filling can be created as you like, as long as you have enough strength and ingenuity.

Chest of drawers for things

This item is needed to store hairdressing equipment: combs, capes, towels. So, a dresser for matchbox dolls should be present in the hairdresser.
What you need for work: 2. Cut out a strip of napkins to fit the desired width and diameter.
3. You can also paste over the back of them.
4. The front part is glued a little differently. Here you need to take out each of the boxes one by one, paste over each one separately with a napkin.
5. We cut out handles from matches, fix them on the boxes.
Miniature matchbox furniture is made very simply and quickly. Anyone can cope with this task - even a child.

Knowing and knowing how to make furniture for Barbie dolls with your own hands, you can create a hairdressing house. This sweat requires a large shoe box. It should be glued inside with colorful paper - this will be the room of the house. Using different colors will add style, add color.

You can, if available, lay a piece of linoleum on the floor, you can not just paste over the walls with paper, but paint them in a natural texture, for example, in a brick wall or create a background in the form of decorative plaster or simple wallpaper.

How to make do-it-yourself furniture for dolls using video or the Internet is more or less clear. Having made all the furniture items necessary for the hairdresser, they are placed in a convenient order in the received house. Holes are cut in the walls in the form of windows, you can decorate them with cornices and curtains. Miniature pictures with hairstyles cut out from magazines will only decorate the design.

If it's interesting, watch a video tutorial on how to make do-it-yourself doll furniture for girls, how to create clothes for Barbie dolls, download crochet furniture knitting patterns and do-it-yourself furniture drawings for dolls.

Manifest Creative skills, develop them in a child with the help of self-designing doll furniture. This lesson will allow you to get closer to the child, help him discover the abilities of the designer. Here are some easy options.

How to make a doll bedside table with drawers

You will need:

• Several boxes of matches according to the number of boxes.
• Cardboard tape, the width of which can cover the desired number of boxes.
• Shiny foil.
• Scissors, glue.
• Several golden plastic beads according to the number of boxes.

Take the boxes, fold them together lengthwise. You should get a table of the planned height. A few pieces can be removed or added, depending on the final idea. Glue the parts of the boxes stacked in a row. Take the cardboard, bend it in the right places, completely wrap it around the side that does not have boxes. Then glue the cardboard. In the finished version, carefully cut its edges with scissors and proceed to the decor.

Decorating a glamorous bedside table can be different. If you cover it with shiny colored paper, similar to multi-colored foil, then there will be a glamorous look, especially if it is crimson, silver, gold. If you want the bedside table to look like a real one, then use imitation wood, colored wallpaper with small patterns or paper similar to them. It is sold in children's art stores.

Gently straighten the paper, apply glue to the wrong side. Spread it so that the foil becomes even. Then glue the back, side with paper, level it until it dries. This is done by the side of the ruler or by a blunt turn of the knife. Boxes can be decorated completely or partially. You need to stick paper on the retractable part, and if you want it to become completely colored, you can extend it and paste it with paper on the outside or inside. The paper also needs to be flattened.

When it dries, proceed to the handles. Take a bead, drop glue on its base. Attach it to the middle of the drawer drawer. Do the same with the rest of the beads, which should be in an even row. They can be replaced with voluminous self-adhesive rhinestones. When they dry, the nightstand is ready.

Doll coffee table

A beginner can do it. You will need:

• Square or elongated box of cream, soap.
• Thick tape, scissors.
• Colored paper like foil.
• Glue.

Take a cardboard box. Cut out the front and back of it. Then glue it with large tape from the inside, then from the outside. It is important that it lies without folds - the attractiveness of the product will depend on this. Then start decorating.

Carefully cut the paper to fit the width of the box. Then stick it on a layer with tape. Paper with a self-adhesive layer is most suitable, on which you need to carefully apply glue, smooth the layer until it dries. Remove glue residue, dry the paper.

This piece of furniture is used as a coffee table for Barbie or a hanging cabinet that is glued to the wall of the house or put several products in one row. And if you combine it with glamorous nightstands, you get a beautiful closet for Barbie. A few more elements need to be added to it. Then furniture for dolls will be stylish and glamorous. She can furnish a room in one style.

Wardrobe for dolls

You will need:

• 1, 2 bedside tables (see "How to make a bedside table").
• 6 coffee tables for Barbie (see "Coffee table for Barbie").
• Large cardboard for the back wall.
• Cardboard for the cabinet door (this can be part of the cream box).
• Beads according to the number of doors.
• Silver foil that looks like a mirror.
• Scissors, glue and tape.

First, place the boxes over the area of ​​the cardboard. It will be the back wall of the cabinet. Place the matchboxes in a row in the middle. Having determined the right amount and proportions, get to work. Make a bedside table with drawers, as in the description. The table, as a shelf in the closet, needs some work. If at first it was necessary to cut out the front and back, now the back is cut out, and the front serves as a cabinet door. It doesn't need to be cut. Cut it to cut from three sides without cutting the door, and paste over with colored paper outside and inside.

When choosing details, it is important that all boxes are the same height and width, then it will look nice and neat. When you have decided on the number of elements, cut off the excess. Get to work.

Define an empty space. It must be pasted over in advance with silver foil imitating a mirror. You can also paste a beautiful picture. It depends on personal taste. In one set, experts do not recommend using two shiny textures, and if you make all the bedside tables and cabinets from raspberry shiny fabric, replace the mirror part with a beautiful photo. Paste it ahead of time. Hide the edges of the picture behind the cabinets.

When all the details are ready, glue them to the back wall. If you want the doors to close easily, attach a sticker or padlock to them. One part is attached to the door, the other to the side wall. They are made from hook-and-loop fasteners. They hold the door securely.

In addition to cabinets, tables and bedside tables, upholstered furniture is also made for Barbie. For example, a folding sofa. Such furniture for modern dolls will look bright and beautiful. Yes, and the material for design depends on your imagination. Here's how to do it.

Folding sofa for Barbie

You will need:

• A large piece of thick cardboard.
• Several sponges for dishes, the same size.
• stapler.
• Black velvet material.
• Upholstery material.
• Ribbon and Velcro.
• Scissors, glue and ruler.

Glue the sponge to the cardboard. Cut it to size. Do the same with the rest of the sponges. You will get three identical pieces. Wrap them with material and secure with a stapler from below. Then take the material slightly smaller than the size of the piece and stick it on the surface from the inside, hiding the traces of fixing. Before us are three identical parts.

We process the back. Cut it out of cardboard, put the material on top. Secure with a stapler. Stick the velvet material on the fastening.

Lay the mattresses on top of each other and apply to the back. Then glue the bottom mattress and secure with tape. Attach it around the entire perimeter of the mattress and secure at the back with glue. Then wrap the tape around the top mattress. Spread the glue over the surface, except for the middle, which will be a loop. She is being pulled to unfold the sofa. The tape does not need to be glued to the wall, because it is fixed at the back with Velcro.

The sofa is ready. To unfold it, open the Velcro and pull the loop. Then carefully fold and use.

Fairy glamor chairs for dolls

They are easy to make from a regular can of Coca-Cola, Fanta or Sprite. To do this, cut the jar into many thin strips. It is better if someone adult does this, as it is easy to cut yourself on the edges of the jar. When the jar is cut, you need to direct part of the strips up (about 1/4 of the entire mass), and all the rest down. Then divide the bottom strips by the number of legs and get to work.

Measure the number of strips that will go on each leg, then start twisting them on the sides. At the same time, the middle leg should remain the longest leg, since it will become the main support of the leg, which sets its length. You can twist the strips in different directions, symmetrically or asymmetrically, depending on your design. When all the legs are ready, you can proceed to the back. It needs to be twisted in the same way as the legs, from the edges to the middle, after which you can proceed to the decor.

The chair looks incomplete without a seat. For him, you need to cut the sponge in diameter, carefully rounding the top. Cover with material and fix on the underside with glue. It is better to use superglue that fixes metal surfaces. When the seat is dry, apply glue again to the surface, attach to the seat of the chair. It dries up and you're done.

A few chairs will allow you to create fantastic attributes of a magical castle. The main emphasis of the design of the chairs depends on the color and texture of the upholstery of the seat. The darker, the more mystical options you will make. Dark shades of purple, emerald or of blue color more suitable for Monster Hight magic dolls than for glamorous Barbie or good fairy. Pink, cream, red tones will create a glamorous or vintage piece, complemented by a round silver table with a leg, and colorful fabric will create a unique vintage flavor.

Floor lamp for dolls

You can make it from aluminum wire and a lampshade. It is made from threads, special beads for decoration or a lace frame.

Beads can be bought at craft stores. They come in different sizes, but wicker ones are suitable for work. They will allow you to create a floor lamp in the style of "country". For glamour, lace lampshades are more suitable. They do it that way.

A cone is made from cardboard or thick paper. Then lace is glued on it. If desired, you can fix them with pearl-tipped needles, then the lampshade will look glamorous. Then let's move on to the frame.

To do this, you need to bend the wire at the bottom and string a thin rod on it. From above, straighten the ends in different directions and put a lampshade on them. Fasten it. The floor lamp is ready and you can put it in the dollhouse. It will suit any design and will be an indispensable decoration. Especially if it's a bedroom, a lounge or even a balcony of Barbie and her friends.

This is not all furniture for dolls that you can make with your own hands. But she'll let the child reveal creative potential, becoming a stepping stone to create masterpieces.

Do-it-yourself doll furniture, photo:

What could be more entertaining, more beautiful and more expensive than handmade doll furniture? This is both a peculiar way of saving money, and a kind of joint creativity of children with their parents. Such an activity will help instill in the child both creative skills, and perseverance, and accuracy. This material offers the simplest and most successful ideas and instructions on how to make furniture for dolls, with photos and diagrams.

DIY doll furniture can be made from anything. At least one of the following materials can be found at home in every craftswoman:

1. Plywood. It makes durable furniture for Barbie: a table, chairs, a wardrobe, a sofa, an armchair, and so on. The creation process is quite laborious, it will require special tools: a jigsaw, sandpaper for grinding, nails, screws, self-tapping screws, glue and paint and varnish mixtures;
2. Cardboard. The process of creating cardboard doll furniture for girls is the easiest and most popular method. It is affordable and easy to use material. From it surprising and on complexity, and on beauty pieces of furniture of any sizes turn out. Not so many tools and consumables are required for work: scissors, acrylic and watercolor paints, glue, pencils, markers, compasses, white and colored paper, scraps of fabrics for decoration. Any furniture for dolls made of cardboard looks stylish, beautiful and original, if done masterfully;
3. Matchboxes. From them you can make any piece of furniture. The advantage of using boxes is the ability to create a drawer. Here it is enough just to show imagination, and having come up with a layout of the future piece of furniture, to translate it into reality. To work with boxes, you will need the same consumables and tools as in the previous case;
4. Wire. It will make beautiful antique furniture for a doll: candlesticks, chandeliers, frames for beds or sofas;
5. Doll furniture made of newspaper tubes is a kind of imitation of interior items made of vines. From them you can make sofas, chairs, armchairs.

This is a far from complete list of improvised materials from which you can make furniture for dolls with your own hands.

Step-by-step instruction

General requirements for creating furniture for a doll from improvised materials:

1. First, a layout is thought out, but you can also use ready-made drawings of furniture for dolls;
2. The drawing is transferred to cardboard in full size. You can print ready-made printouts of parts using a printer, attach them to cardboard, circle, and then cut them out;
3. If do-it-yourself furniture for dolls is made from plywood sheets, then you will have to cut the details with a jigsaw or a hacksaw. Then sand the ends with sandpaper;
4. Finished parts, according to the instructions and sequence, are glued or fastened with self-tapping screws;
5. The finished product is painted or trimmed with fabric, decorated, if desired, with jewelry elements or drawings.

Each puppet miniature has its own sequence and assembly technology.

Bed

An integral attribute of any gameplay of a girl with a doll is a bed. This master class will teach little craftswomen step by step how to make do-it-yourself furniture for dolls using the most ordinary cardboard:

1. First, we make a drawing of the future bed on a sheet of cardboard. We lay the doll on cardboard to take measurements of the length. We measure the full height and add about 5 cm. We also measure the width of the crib, it can be anything. It depends on the personal desires of the craftswoman. We draw a rectangle of the required size, respectively, cut it out with scissors or a clerical knife in the amount of 3 pieces;
2. Next, we design the railing. They should be the same width as the bed. The length can be different, but always one back is longer than the other. We also cut out 3 pieces;
3. In order for the backs to be stronger and more stable, they will need to be glued and put under a press until completely dry;
4. For the preparation of a sleeping place, we lay a bed, a pre-cut wire (the length of a sleeping place plus 3-5 cm), also in the amount of 3 pieces, a little more can be. We attach to the base with adhesive tape;
5. From above, on a base with a fixed wire, we glue the remaining blanks. We also put it under the press until it dries completely;
6. After all the details have dried, we attach the glued railing to the bed, mark the attachment line with a pencil. Especially in those places where they come into contact with the wire. We make holes with an awl or a thick needle;
7. Pour a little glue into the holes obtained, stretch the wire into them, tightly leaning the workpieces against each other. The ends of the wire are tightly fastened or tied together. Cut off the excess edges.

The bed frame is ready, it remains only to decorate it. Decorating such a barbie bed with your own hands is also not difficult. It can be glued on top with colored or plain white paper. Just paint with paints, decorating with something from jewelry. It will be beautiful to cover it with a piece of fabric, and bed linen can be made to match. You can cut foam rubber to the size of the bed, cover it with the same fabric, thus constructing a doll mattress.

Cut out the details you need

Connecting elements

Seal the seams with paper

Paste the bed with colored paper

Kitchen

To create it, small boxes of different or identical sizes are suitable. Depending on the idea, the kitchen can be open, then all the pieces of furniture made by hand from paper can be placed anywhere, can be moved at will. If you plan to create hanging cabinets, then they need to be fixed somewhere. So it will be necessary to make a back wall out of cardboard. The cabinets themselves are easy to make from simple matchboxes, combining them several in a row or one at a time.

You can also use other small cardboard boxes, cut doors into them, glue paper on top, or simply paint them in your favorite color. Make handles from jewelry wire and beads.

From several boxes glued together, you can make a stove, ordinary buttons can serve as burners. Functional and realistic is obtained toy furniture from matchboxes. Consider how to make a doll cabinet with drawers for storing utensils.

In the course of work you will need:

• Matchboxes 3-4 pieces;
• Paints;
• Foil;
• Glue with scissors;
• Colored paper (can be cardboard);
• Beads 3-4 pieces.

Instructions for execution:

1. We put the boxes out of the boxes, paint them in the desired color, leave to dry;
2. We put them back;
3. We stack the boxes on top of each other;
4. You can glue them together immediately, or without gluing, cover them with cardboard cut to size;
5. Boxes can be decorated with foil by cutting slightly smaller rectangles out of it;
6. Make handles from beads, attach to the box with ordinary wire.

In the same way, you can make other doll furniture your own, for example, a chest of drawers for dolls from matchboxes. Then you have to glue them together in several rows.

Work surface for the kitchen out of the box

For work it will be useful:

• Washing powder cardboard box;
• White sticker;
• Plastic packaging for yogurt;
• A piece of paraffin candle;
• Sponge;
• Drinking tube for juice.

Manufacturing process:

1. We cut the powder box to the desired height. To do this, we apply the doll to the box and measure the distance just above the hip line or to the waist;
2. We cut off the excess part, glue the working part with a self-adhesive film of a suitable color;
3. We cut out the countertop, according to the size of the yogurt container, insert it there, glue it.

The dishes can be made of plasticine, painted on top with white acrylic paint, after drying it will shine, resembling porcelain, if it is cups, or enamel, if it is a teapot or pan.

Preparing the boxes

Making a project

Gluing the boxes

We make the decoration of the kitchen with colored paper

Making a faucet from a pipe

We fix the crane

Table

It is impossible to imagine an interior, albeit a puppet one, without a table. Parsing the question of how to make furniture for dolls with your own hands, let's focus on making a large dining table. Following the instructions, you can do it yourself without difficulty:

1. First you need to decide on the size of the product;
2. Then cut out about 3 rectangles of the desired size. A tabletop in several layers will keep its shape better and more reliably;
3. The legs can be cut from the sides of the cardboard box, they will be even and strong. If there is a desire to make them curly, then you will need to cut them separately in several copies, glue several pieces and attach them to the tabletop;
4. We fix the tabletop and legs with glue or a silicone gun;
5. From above, we glue the product with colored paper or matched to a tree.

To make a small coffee table, a completely transparent plastic lid is useful, for example, from sour cream and empty tubes from soap bubbles. We place the lid on the tube, glue it with silicone. We choose the height as desired.

We make blanks

We connect the elements of the tabletop

We fasten the legs

Making decor

Chairs

To create chairs, wire, aluminum cans from juices and drinks are suitable. Such furniture should be made by adults, since the edges of the cans are too sharp, which means that the child cannot avoid cuts:

1. To create them, you should take a jar, cut into many strips;
2. Bend part up for the back, part down for the legs;
3. From the stripes, by twisting (symmetrically, asymmetrically, whatever) form the back;
4. The legs are made from several strips twisted together, so they will be stronger and look more solid;
5. From the remaining strips, you can make decorative elements, as in forged furniture;
6. The bottom of the jar contains a recess, which looks unfinished in our high chair. You can correct the situation by cutting the seat out of foam rubber or dense fabric, glue it with superglue.

Several of these chairs will create an original ensemble of a magic puppet castle.

We make blanks

We fix the back

Making a foam seat

We fix the foam rubber

Salon

You can make paper furniture in a variety of ways, from simple to the most complex models. Anyone can create a hairdressing salon from several pieces of furniture. Consider and make simple furniture for barbie dolls. A dressing table is an essential attribute of a hairdressing salon. This is what we will continue to do. For work, you should prepare:

• A cardboard packaging box, from hair dye is quite suitable;
• A piece of foil;
• White and multi-colored paper for pasting.

Process of creation:

1. The box is cut to fit Barbie's height - it's about 80 cm;
2. A rectangle is cut out of the excess part (under the mirror), its shape can be rounded, figured or straight, it depends on personal preferences. The width must match the width of the cabinet;
3. Attach the rectangle to the base of the table;
4. We glue the entire product with white or colored (wood-like) paper;
5. On the facade of the cabinet-table we draw doors and drawers;
6. We cut out a mirror from the foil, glue it on the protruding cardboard;
7. With beads we form handles on doors and drawers. Simply spread with glue and fix in the right places.

This toy dressing table model looks like a real one, so it will become a favorite in the game. You can complement the interior with a bedside table made in the same way. The scheme of weaving furniture with your own hands from newspaper tubes is described in detail in the video.

Cupboard

Following the patterns of the scheme, you can build a wardrobe for the doll. After all, they also need somewhere to store their clothes. To make such a cabinet you need:

• Cardboard box of the right size;
• Paper for pasting;
• Glue gun with silicone rods;
• Paper clips for hangers;
• Cocktail straw for handrail.

Progress:

1. We cut off the top of the box;
2. We leave the resulting doors;
3. We divide the box into two parts - one for the shelves, the second for the handrail with hangers. We cut out the crossbar from durable cardboard, fix it with silicone;
4. We paste over the entire box with paper of a suitable color and texture;
5. From the same thick cardboard we cut out the shelves, fix them with silicone;
6. A cocktail pipe will serve as a handrail, cut out the desired size of the beam, glue it to the sides of the cabinet;
7. We make clothes hangers from paper clips;
8. Such a locker will look like the original if it is pasted over with wood-like paper on top. Glue foil on the door, which will act as a mirror.

As you can see, furniture for Barbie dolls can be created from any materials. This work does not require special efforts and costs. You can draw ideas for dollhouse furniture from this article or come up with your own.

Crocheted furniture will look very impressive and stylish, but this is only suitable for those who can and know how to knit. Everyone else should not be upset - there are a lot of improvised, unnecessary materials in the house, and if you think carefully, they will turn out to be no less attractive products for the doll house. How to build furniture from cardboard, matchboxes and other materials, we hope, it became clear to the little craftswomen.

We take cardboard and draw lines

Connecting dots on cardboard

We glue blanks

Making decor

Video

Children's games are largely based on imitation of the actions of adults. Children (especially girls) enjoy watching and copying everything that their mother or grandmother does. Every baby has a mom doll, dad and their children who live their own lives. family life, cook food, go to work, do homework, watch TV and go to bed.

For a full-fledged game, dolls, of course, need their own house. Of course, the modern assortment of toy stores makes it easy to solve the problem of furnishing. They have absolutely everything: from bedroom sets to household appliances, plastic products and dishes. However, such doll furniture costs absolutely unthinkable money.

Any materials can become the basis for doll furniture!

It's easier to do everything you need with your own hands. Such an exciting process, of course, will interest your child. The baby will definitely make all possible work when creating sofas, tables and cabinets for your favorite toys. Let's figure out what kind of furniture you can quickly and easily make with your own hands, and also find out what tools you will need for this.

What do you need to make doll furniture?

Do not think that the process of making doll furniture is hard work that takes your time and energy. Try to make doll furniture on your own just once, and you just won’t be able to stop, because this is not just another way to save money!

This is an exciting creative process in which you and your child will be able to show out-of-the-box thinking and a sense of style. At the same time, you will master all kinds of decorating techniques and get another fun joint activity that will brighten up the long autumn and winter evenings.

Assembling furniture for dolls is a very exciting and creative process.

Look around - you will immediately notice how many items that usually go in the trash can can be used! They will become the basis for the manufacture of all kinds of puppet items. If you decide to make furniture with your own hands, stock up on the following improvised means:

• matchboxes, which in a couple of minutes turn into chests of drawers, kitchen sets, cabinets and dressing tables;
• cardboard boxes in which shoes, cosmetics or household appliances were packed, because these are the bases for cabinets, beds and tables;
• plastic bottles from which you can make stylish chairs;
• bright sponges designed for chores and washing dishes, which will serve as an excellent stuffing for upholstered furniture;
• viscose cleaning wipes;
• plywood;
• shreds of fabric, leather or suede;
• wire and foil;
• cardboard blocks in which eggs are sold;
• threads, buttons, rhinestones and beads that will allow you to create bright furniture of a unique design;
• ice cream sticks, toothpicks, Chinese chopsticks;
• glue, scissors, clerical knife, pens, markers, paints.

A matchbox is one of the cheapest and most affordable materials.

After you have prepared a sufficient number of necessary items, you can start making furniture for dolls.

dressing table for dolls

Dolls love to preen, so they simply cannot do without a table with a mirror! To make such a table, prepare:

• a small cardboard box of hair dye;
• foil;
• colored paper.

Stages of making a table:

1. Determine the height of the table by measuring the doll in a sitting position. For example, for a Barbie doll, its height will be approximately 8-9 centimeters.
2. Cut out the box and cover with colored paper. Using a marker or gel pen, draw sketchy doors and glue small beads that will imitate handles.
3. Do not throw away the rest of the box, but cut an oval or rectangular piece out of it for a future mirror. From the foil, cut a piece of suitable size, stick it on the blank for the mirror. It can be glued around the perimeter with colored paper.
4. Lubricate the base of the mirror with glue and attach it to the blank for the table, going to its back side.

A box of hair dye will become the basis of the dressing table

Dresser for dolls

Storing clothes requires that the room has chests of drawers with drawers. To make a doll dresser you will need:

• matchboxes;
• matches;
• dense napkins with patterns.

Stages of making a dressing table:

1. Take three matchboxes and glue them together, placing one box on top of the other.
2. From thick napkins, cut out pieces for pasting the boxes around the perimeter. It is not necessary to glue the back of the napkin so that the boxes can be pulled out by pressing them with your finger.
3. Take out the drawers and stick pieces of napkins on the front.
4. Cut the matches into small sticks (discard the heads with sulfur) and stick the sticks on the drawers to create an imitation of handles.

Matchboxes are an excellent material for making a chest of drawers.

Coffee table for dolls

When the dolls gather for tea in the living room, they need a table on which to put the cups from the set of dishes. This piece of furniture will require the following items:

• sheet of thin plywood;
• chopsticks;
• jigsaw;
• acrylic paints.

Step-by-step process of making a table:

1. Cut out a circle from the plywood sheet, which will eventually become a lid.
2. Cut the sticks into sticks for legs.
3. Glue the cut of the bars and the place to which they will be attached to the lid with glue.
4. Glue the legs.
5. After the glue has dried, paint the table with several layers of acrylic paint.

Sofa

No living room is complete without an elegant sofa for which you will need the following items:

• flat wooden plate;
• chopsticks;
• cotton wool;
• acrylic paint;
• a piece of soft fabric for pillows;
• decorative braid;
• thick fabric (velvet or velveteen) for upholstery.

In the manufacture of doll furniture, creativity and ingenuity are important

Sofa making steps:

1. Measure a wooden plate and prepare fabric upholstery for it (do not forget to leave allowances).
2. Lubricate the plate with glue and drape the fabric on all sides.
3. Cut the Chinese sticks into 4 bars (the width of the bar should match the width of the wooden block). Cover the bars with paint;
4. When the paint dries, glue the two roller legs to the fabric-covered base. Glue two more rollers to the top of the sofa to imitate the side handle rollers.
5. Glue decorative tape around the perimeter of the sofa to hide the joints of the fabric.
6. To make pillows, cut pieces of fabric into small squares, sew from the inside out on three sides. Turn the resulting squares to the left side. Stuff with cotton and sew with a hidden seam.

Bed for dolls

Not a single dollhouse can do without a sufficient number of beds, because the girls are so happy to put their charges to bed before they themselves go to rest. There are several simple options for making beds for dolls.

Option 1: Matchbox bed

For little babies or toys, you can make a mini version of a bed out of matchboxes. For this you will need:

• 2 box;
• a piece of cardboard;
• patches of fabric;
• cotton wool;
• rhinestones, beads, cords;
• microfiber household napkin;
• White paper.

What you need to do to make a crib:

1. Place two boxes on cardboard and cut out two rectangles according to measurements.
2. Glue the boxes together, fastening the sides with gray. Paste over the top and bottom with pieces of cardboard.
3. Paste over the sides with paper or cardboard to hide the sulfur. Do not paste over the back and front of the box so that the crib has drawers for storing linen.
4. Cut out a rectangle from a household napkin and stick it on the bed so that the dolls have a mattress.
5. Cut out the head of the bed from cardboard, paste over with white paper and glue it to the bed. Decorate the headboard with rhinestones, beads or a decorative cord.
6. Cut out one rectangle from the scraps of fabric according to the size of the bed - this will be the sheet.
7. Cut out two rectangles for making a blanket in a duvet cover (leave 0.5 cm for the seams). Sew the fabric inside out, turn it inside out. Using sharp scissors, make a diamond-shaped hole in the center.
8. Cut a blanket out of a laundry napkin and tuck it into a duvet cover. Sew the bottom of the duvet cover with a hidden seam.
9. Cut two squares from a piece of fabric and sew a pillow, stuffing it with cotton.

A cardboard bed is the most sought-after piece of doll furniture.

Option 2: Large crib out of the box

In this case, you need to stock up:

• a box of hair dye or a small household appliance;
• sponge or piece of foam rubber;
• colored paper;
• decorative braid, buttons, rhinestones.

Manufacturing process:

1. Cut off one of the wide pieces from the box. Cut off 1-2 centimeters from the sides so that the headboard and bottom frame appear at the crib.
2. Glue the box along all the folds so that the crib does not fall apart.
3. Cover the box with colored paper ( inner part may not be glued).
4. Cut a piece of thick sponge or a few rectangular pieces of foam rubber to the measurements of the box. Place them inside the box to make a mattress.
5. Glue decorative cords along the edges of the box, and decorate the headboard with rhinestones, flat buttons and other elements.

Armchairs for dolls

Each doll should have its own place, because for receiving guests, having lunch or preening at the dressing table, little residents of a toy house will definitely need a comfortable armchair.

Option 1: Cardboard chair

To make this chair you need:

• a sheet of thick cardboard;
• stationery;
• thick foam or corrugated cardboard;
• the tube left from the spool of thread;
• sheet of thin foam rubber;
• piece of cloth.

Chair manufacturing steps:

1. To make the seat, cut out 4 identical rectangles from the foam board. Lubricate with glue and connect by laying one piece on the other. Cover the top and sides with foam rubber. Stretch and glue the fabric over the foam rubber.
2. Cut out a rounded back from a piece of thick cardboard. Glue the foam, leaving a small gap to connect with the seat. The foam must be covered with a cloth.
3. Glue the seat and back.
4. From the tubes of threads, cut out the part necessary for the manufacture of side rollers. Cover the armrests with fabric. Glue the rollers to the seat of the chair.

With cardboard and paper on hand, you can make a beautiful chair for dolls.

Option 2: Designer chair from a plastic bottle

Such an armchair will be no worse than modern designer furniture, and for its manufacture you will need the simplest and cheapest materials:

• thin foam;
• household sponge;
• the cloth;
• decorative braid.

The manufacturing process includes the following steps:

1. Draw a diagram of a chair with a back along the solder line of the bottom. Start cutting, gradually turning the cut line up, so that you get a chair with a high back and smooth armrests.
2. Cut out a round blank from a household sponge so that the chair seat is soft. Top with fabric. Place the foam rubber in the middle of the cut out bottom of the bottle.
3. Cut out pieces of thin foam rubber to stick on the back of the chair and its armrests.
4. Cover the outer part of the chair with foam rubber. Cover the back, armrests and outer part of the chair with fabric.
5. Decorate the joints with a cord or braid.

According to the same scheme, you can make an armchair for small dolls, only you need to use not bottles for them, but egg boxes.

Ottoman for dolls

A bedroom set would not be complete without soft ottomans, for which you need to stock up:

• cardboard from a roll of toilet paper;
• foam rubber;
• cloth.

To make a pouffe:

1. Cut the cardboard sleeve into two parts (it is best to do this with a sharp clerical knife).
2. Cut two circles from the foam rubber that fit snugly into the hole in the tube.
3. Drape the foam with fabric.
4. Cover the tubes with cloth.
5. Slip the foam seat into the tube. For beauty, ottomans can be decorated with braid or pieces of thin lace.

Kitchen furniture

The kitchen is the most important place in any home. Doll housing is no exception to this rule, because little housewives love to play cooks and treat dolls with various dishes. To make furniture for the kitchen space, you will need:

• several dozen matchboxes;
• a sheet of thick cardboard or thin plywood;
• colored paper;

Kitchen furniture can be made from a variety of matchboxes

Stages of making a kitchen for dolls:

1. Glue nightstands from three boxes placed one on top of the other. Glue each of these blanks around with colored paper to hide the sulfur.
2. Glue the sides of the four blanks.
3. Take three matchboxes and cut off the lid on one side so that it opens. Stick colored paper on the box.
4. From a piece of cardboard, cut off a part that will be equal to the length of the connected blanks from matchboxes.
5. Glue the nightstands to the cardboard, grabbing only the topmost of the boxes (the bottom two drawers will open when pressed with a finger).
6. Step back four centimeters and stick the top drawers of the headset.
7. Glue a grain of rice on each drawer to imitate handles.

Desk for dolls

Girls love to play school, so the dolls will definitely need desks where you can prepare lessons. To make this doll interior item, you need to stock up:

• 4 box of matches;
• a sheet of thick cardboard;
• matches;
• self-adhesive "under the tree".

The step-by-step process of making a desk looks like this:

1. Glue three matchboxes on top of each other to make a cabinet with drawers. Paste the workpiece with self-adhesive film.
2. Cut out the table top from cardboard. Cover the top with self-adhesive tape.
3. Tape one more box with foil.
4. Connect the bedside table and the tabletop, and use an additional box as a second support (its height is just equal to three glued boxes).
5. Cut the matches into small bars and make handles on the nightstand.

Don't stop at one piece of furniture - make a set!

Wardrobe for dolls

Dolls definitely need a place where you can hang dresses, blouses and skirts, so the set will not be complete without a roomy wardrobe. To make a wardrobe, you will need:

• a box of paint or a small household appliance;
• self-adhesive;
• buttons "on the leg";
• cardboard;
• Chinese stick;
• wire.

Cabinet manufacturing steps:

1. Take a closed box and cut the front part with a clerical knife - so that you get the doors of the future cabinet. Tape the cabinet with self-adhesive tape.
2. Cut a piece from a Chinese stick equal to the width of the cabinet.
3. Cut out two circles from cardboard, slightly larger than the thickness of the stick. Stick the cardboard on the ends (they need to be sanded a little for a better connection).
4. Lubricate two points inside the cabinet with glue, attach a hanger stick.
5. Cut the wire into pieces (about 8-10 centimeters) and twist the hangers into triangles. At the top, leave more twisted wire to make a hook.
6. Using an awl or a thick needle, make two holes in the cabinet doors and sew on the buttons so that you get handles.
7. Place hangers in the closet.